The First P300 Extractive Gas Analyser Shipped
7
Protea has recently manufactured and shipped its very first P300 Extractive Gas Analyser. Monitoring percent levels of HCl, HF and SO2 the unit will monitor high levels of corrosive toxic gases in a hazardous area.
All sample “wetted” components are manufactured from Monel, the zero / calibration valves are pneumatically actuated. The sample cell has a purged containment element, if for any reason the window seals fail the process gas will be discharged to a safe vent. In the event of the pressure exceeding 6 bar(g) or a power failure the process sample gas is isolated and the cell purged with instrument air. The cell was pressure tested to 12Bar(g)
The Protea 300 is a multi-component configurable gas and liquid analyser certified for use in hazardous area. Applications in BioGas, Bio Methane, Natural Gas and many applications in refineries. More information on the P300 is found here www.protea.ltd.uk/p300-extractive-gas-analyser
Other Articles
CCS Online Monitoring Now Available
04
Meeting Marine Emissions Challenges
04
CCS Carbon Capture and Storage
01
Protea At The 2022 Asia Pacific Maritime Exhibition
29
APM Asia Pacific Maritime Exhibition In Singapore 16/03/22 - 18/03/22
08
First CEM Event For 2022 Is At Krakow In Poland 02/03/22 - 04/03/22
10
Lowest NO and NO2 MCERTS emissions analyser
03
Differences between CEN/TS 17337:2019 and TGN M22 for Portable FTIR Emissions Testing
11
GPS Enabled Gas Analysers
08
Applied Technologies Through Innovation
07